WOLFANGEL^® Fibre Cutting Equipment

WOLFANGEL^® Fibre Cutters are able to cut nearly all fibres. These cutters can be used for many applications and can be integrated to all robot systems.

With the WOLFANGEL^® Vario Cutter it is possible to cut the fibres with a speed up to 20 m/sec. The length of the fibres can be changed during the cutting process at full speed. With this cutter it is possible to produce fibres with a length between 3 up to 100 mm. The cutter can be driven by either a hydraulic or an electric motor. With the possibility of different combinations between knife and rubber role, it is possible to cut nearly all types of fibres.

Advantages of WOLFANGEL^® Fibre Cutter

• Changeable fibre length during cutting process at full speed.
  
• Cutting length: 3-100 mm (extra length on inquiry)
  
• Automatic adjustable knife role at wear of the rubber role
  
• Adjustable cutting force between knife and rubber role
  
• Compact size and adaptable to each robot system
  
• Speed sensor
  
• Low weight (less than 6 kg)
  
• Different driving systems (hydraulic or electronic motor)
  

We are able to deliver all the sensors (stop motion of the fibre etc.) and all the accessories and equipment for guiding the fibre from the spool to the cutter.